What the 75 kVA rating tells a buyer
The nameplate rating describes apparent power capacity, not the operating power, sales price or physical condition of the transformer. 75 kVA is equivalent to 0.075 MVA; these are two expressions of the same apparent-power rating. The rating alone does not say how the unit was loaded or whether it is suitable for another application.
For an equipment lot with several nameplates, report the 75 kVA rating for each applicable unit separately. Do not add ratings and present the sum as the nameplate rating of one transformer. If the plate lists multiple cooling or operating ratings, share the complete plate or explain which values are recorded instead of selecting one without context.
Complete the electrical and site description
Alongside 75 kVA, report primary and secondary voltages, number of phases, frequency, manufacturer and model where known. Do not convert a kVA value into an assumed kW output without an applicable power factor; real power and apparent power are different quantities.
Describe whether the unit is in service, disconnected or stored, and identify the route to a loading point. No seller testing is required for an offer request. Qualified personnel are responsible for isolation and disconnection, and any purchase depends on review and agreement.
Voltage is a pair of specifications
A transformer normally has ratings associated with more than one winding. Provide the high-side and low-side values exactly as shown, along with phase and frequency, instead of reporting only the service voltage or a rounded label. If the plate lists multiple voltages or taps, include those details rather than guessing which applied.
Voltage alone does not establish compatibility with another installation. Winding configuration, insulation and other nameplate details can matter to a review. No seller is asked to open a transformer or make electrical measurements for an initial cash-offer request.
Explain insulating-fluid information
If a unit contains insulating liquid, share any existing fluid identification, labels, maintenance history and environmental records. If the type or PCB status is unknown, say that plainly. Some older electrical equipment may contain PCBs; an appearance, age or manufacturer name by itself does not establish the contents of a particular transformer.
The seller is not asked to perform testing to request an offer. Existing documentation may nevertheless be needed for review and for responsible handling, and an unknown or unsuitable status can affect whether a transaction is possible. Do not drain, sample or disturb the unit merely to prepare an inquiry.
Coordinate with the right electrical owner
A transformer may be part of a facility's electrical system or may belong to another entity. The asset owner should confirm ownership and the equipment's release status. If a utility or another party controls the connection, coordinate with that party through the proper channels rather than assuming that an on-site contractor can remove it.
Qualified electrical personnel must handle isolation and disconnection under the applicable site procedures. The purchase review can start with existing records while those decisions are being made, but the unit should not be represented as ready to move until the responsible parties confirm it.
Photographs that help without creating risk
A wide exterior image can show the transformer's position and surrounding access; a clear image of an already visible nameplate can identify the rating. Additional exterior views may show how much space is available on each side and whether parts are stored separately. Label photos so that a mixed lot is not confused.
Only take pictures from an authorized, safe location. Do not remove covers, enter restricted electrical areas without authorization, touch terminals or approach energized equipment to make a better photograph. Existing photographs and documents are acceptable starting points when new images cannot be obtained safely.
Assess an outdoor location
For equipment located outdoors, describe the surface and the path to a vehicle using observations rather than assumptions. A photograph may show a concrete pad, a fenced area, a sloped approach or a route that crosses unpaved ground. Note any known site rules about vehicle access or ground protection.
Weather and ground conditions can change between a quotation and the planned collection. Give the buyer updated information if the accessible route changes, and let the parties determine the appropriate lifting and transport plan. Do not move the transformer simply to improve its apparent accessibility.
How the purchase process works
Start with the unit's location, quantity and any nameplate or inventory details you can share safely. We buy used, surplus and decommissioned transformers across all voltage classes, subject to review and agreed terms. We are a purchaser seeking equipment, not a seller of transformers. A request for review does not guarantee an offer or acceptance of a particular unit.
For equipment accepted under mutually agreed terms, we offer cash, payment upfront and covered freight. Ask for the payment timing, transport scope and any preparation responsibilities in writing before agreeing. Site-specific electrical work, specialized rigging and other arrangements should be spelled out; coverage is subject to the agreed transaction terms.
We do not require sellers to test equipment. Share any existing documents honestly, including known fluid or environmental information. Our review may depend on available documentation, and appropriate legal and safety requirements still apply.
Keep electrical safety separate from the sale
Do not open energized equipment, remove covers, touch connections or attempt electrical work to prepare a listing. Qualified electrical personnel must isolate and disconnect equipment and verify a safe condition using the site's applicable procedures. Treat a unit as potentially energized until the responsible qualified personnel have established otherwise.
Tell the buyer what is known about the equipment and access without attempting unsafe inspection. For possible fluid or PCB concerns, use existing labels and records and involve the appropriate environmental professionals. Do not drain or sample a unit simply to obtain a quote.
Frequently asked questions
Does 75 kVA determine the cash offer?
No. The capacity is one identifying detail. Voltage, phase, condition, documentation, included components, access and the individual review may also matter. The buyer can decline or propose terms after review.
Do I have to test the transformer before asking for an offer?
No. We do not require sellers to test equipment. Provide existing nameplate information, photographs and records when safely available, and identify unknowns. Review, acceptance and any required documentation depend on the equipment and agreed terms; this does not remove safety or environmental obligations.
Is freight covered and when is payment made?
For a purchase accepted on agreed terms, the business offers payment upfront and covers freight. Confirm the payment and pickup arrangements in the written agreement, including whether specialized rigging, loading or site preparation is separately assigned. An inquiry alone does not guarantee a purchase.
What equipment can I submit for review?
We review used, surplus and decommissioned transformers across all voltage classes, including 75 kVA transformers. Send the quantity, known ratings, location, ownership status and any available records. The final decision and transaction scope depend on review; not every unit can be accepted.
