Identify the 115 kV nameplate rating
The 115 kV figure may describe one side of a transformer, not its entire voltage configuration. Record the high-side and low-side ratings, the number of phases and the capacity exactly as shown on the nameplate or in an existing equipment record. If the meaning of a value is uncertain, share the source and say so.
For a transformer with this voltage on a nameplate, the complete winding, insulation and accessory information can matter to review. The voltage figure alone is not enough to specify the unit or its removal. A rating is not proof of present operating condition, ownership or electrical compatibility with another system.
Prepare a complete purchase request
Include the site location, whether the unit is connected or stored, and known manufacturer, model and serial number. Multiple tap settings, winding configurations or listed ratings should be included when available rather than condensed into a single voltage.
We consider transformers across all voltage classes, but an offer is not automatic. Do not open an enclosure or measure electrical values for the request. Qualified personnel isolate and disconnect the equipment using the applicable procedures before any authorized removal.
Photographs that help without creating risk
A wide exterior image can show the transformer's position and surrounding access; a clear image of an already visible nameplate can identify the rating. Additional exterior views may show how much space is available on each side and whether parts are stored separately. Label photos so that a mixed lot is not confused.
Only take pictures from an authorized, safe location. Do not remove covers, enter restricted electrical areas without authorization, touch terminals or approach energized equipment to make a better photograph. Existing photographs and documents are acceptable starting points when new images cannot be obtained safely.
Discuss lifting and loading explicitly
The label may list a weight, but the transport plan also depends on the complete configuration and the route from the unit to the truck. Share the listed weight and dimensions if already available, and identify loose parts that might travel separately. Flag uncertainty rather than estimating from kVA alone.
Qualified riggers and carriers determine appropriate equipment and load handling for the actual job. Ask whether the agreement includes only freight or also loading and specialized rigging; specify any site-provided forklift or crane only if the site has authorized it for the work.
Why phase and kVA matter together
The kVA rating describes apparent power capacity; it does not by itself identify the voltage, number of phases or physical configuration. A single-phase unit and a three-phase unit with the same kVA can serve different applications. Record the number of phases and both voltage ratings alongside the capacity if those details are available.
A kVA figure is not an asking price or a guarantee of market value. The full specification, existing records, condition, access and the review of the particular unit can influence an offer. If a rating has multiple cooling conditions or tap settings, send the plate rather than choosing one value without context.
One unit or a mixed equipment lot
A mixed lot can contain units with different ratings, manufacturers and histories. Number each transformer and provide a separate nameplate image or existing record for each one. Explain which units are being offered together and whether a buyer may review individual units separately.
List loose parts, cabinets and associated switchgear separately rather than assuming that an offer for a transformer includes everything nearby. A clear inventory makes it easier to compare an offer with the actual scope of pickup and avoids a dispute about a unit that was intended to stay.
Read the nameplate as a set of details
A capacity number alone is not an equipment specification. Where a nameplate is safely visible, record the manufacturer, model and serial number, kVA or MVA, phase, primary and secondary voltages, frequency and any listed weight. Record values as printed rather than guessing at a missing digit or rounding a rating.
If a plate is obscured, a former inventory record or electrical drawing may help the buyer begin a review. Identify the document as a record rather than a current inspection, and distinguish information that is unknown from information you have verified. Do not open an enclosure or approach exposed electrical parts for a photograph.
How the purchase process works
Start with the unit's location, quantity and any nameplate or inventory details you can share safely. We buy used, surplus and decommissioned transformers across all voltage classes, subject to review and agreed terms. We are a purchaser seeking equipment, not a seller of transformers. A request for review does not guarantee an offer or acceptance of a particular unit.
For equipment accepted under mutually agreed terms, we offer cash, payment upfront and covered freight. Ask for the payment timing, transport scope and any preparation responsibilities in writing before agreeing. Site-specific electrical work, specialized rigging and other arrangements should be spelled out; coverage is subject to the agreed transaction terms.
We do not require sellers to test equipment. Share any existing documents honestly, including known fluid or environmental information. Our review may depend on available documentation, and appropriate legal and safety requirements still apply.
Keep electrical safety separate from the sale
Do not open energized equipment, remove covers, touch connections or attempt electrical work to prepare a listing. Qualified electrical personnel must isolate and disconnect equipment and verify a safe condition using the site's applicable procedures. Treat a unit as potentially energized until the responsible qualified personnel have established otherwise.
Tell the buyer what is known about the equipment and access without attempting unsafe inspection. For possible fluid or PCB concerns, use existing labels and records and involve the appropriate environmental professionals. Do not drain or sample a unit simply to obtain a quote.
Frequently asked questions
Is 115 kV enough information for an offer?
It is a useful starting point, but it describes only one part of the specification. Share the other winding voltage, phase, kVA, site location and available records. Review and acceptance depend on the actual equipment and terms.
Do I have to test the transformer before asking for an offer?
No. We do not require sellers to test equipment. Provide existing nameplate information, photographs and records when safely available, and identify unknowns. Review, acceptance and any required documentation depend on the equipment and agreed terms; this does not remove safety or environmental obligations.
Is freight covered and when is payment made?
For a purchase accepted on agreed terms, the business offers payment upfront and covers freight. Confirm the payment and pickup arrangements in the written agreement, including whether specialized rigging, loading or site preparation is separately assigned. An inquiry alone does not guarantee a purchase.
What equipment can I submit for review?
We review used, surplus and decommissioned transformers across all voltage classes, including 115 kV rated transformers. Send the quantity, known ratings, location, ownership status and any available records. The final decision and transaction scope depend on review; not every unit can be accepted.
