Identify the 23 kV nameplate rating
The 23 kV figure may describe one side of a transformer, not its entire voltage configuration. Record the high-side and low-side ratings, the number of phases and the capacity exactly as shown on the nameplate or in an existing equipment record. If the meaning of a value is uncertain, share the source and say so.
For a transformer with this voltage on a nameplate, the complete winding, insulation and accessory information can matter to review. The voltage figure alone is not enough to specify the unit or its removal. A rating is not proof of present operating condition, ownership or electrical compatibility with another system.
Prepare a complete purchase request
Include the site location, whether the unit is connected or stored, and known manufacturer, model and serial number. Multiple tap settings, winding configurations or listed ratings should be included when available rather than condensed into a single voltage.
We consider transformers across all voltage classes, but an offer is not automatic. Do not open an enclosure or measure electrical values for the request. Qualified personnel isolate and disconnect the equipment using the applicable procedures before any authorized removal.
Describe the actual loading point
A transformer at a loading dock is a different freight problem from one behind a fence or on a building floor. Say where a carrier would need to stop, whether the equipment is already staged, and if the pickup point is shared with other operations. Photos taken from a safe location can help show the approach as well as the unit itself.
Do not assume that freight coverage automatically includes every crane, forklift, rigging operation or construction task. Identify the equipment and labor the site can provide, if any, and ask for the written agreement to identify responsibilities for bringing the unit to the truck and loading it.
Photographs that help without creating risk
A wide exterior image can show the transformer's position and surrounding access; a clear image of an already visible nameplate can identify the rating. Additional exterior views may show how much space is available on each side and whether parts are stored separately. Label photos so that a mixed lot is not confused.
Only take pictures from an authorized, safe location. Do not remove covers, enter restricted electrical areas without authorization, touch terminals or approach energized equipment to make a better photograph. Existing photographs and documents are acceptable starting points when new images cannot be obtained safely.
Voltage is a pair of specifications
A transformer normally has ratings associated with more than one winding. Provide the high-side and low-side values exactly as shown, along with phase and frequency, instead of reporting only the service voltage or a rounded label. If the plate lists multiple voltages or taps, include those details rather than guessing which applied.
Voltage alone does not establish compatibility with another installation. Winding configuration, insulation and other nameplate details can matter to a review. No seller is asked to open a transformer or make electrical measurements for an initial cash-offer request.
When a building is being cleared
A building sale, lease turnover or redevelopment project can create pressure to clear electrical equipment. First distinguish assets being sold from equipment required by the next occupant or reserved for the building owner. Match the transformer to the asset schedule and check that the person arranging the sale has authority.
A desired vacancy date is useful context, but it does not replace an agreed pickup plan. Identify dependencies such as a shutdown, removal path, building access and available loading area. Share changes promptly so that the equipment and transportation review reflects the actual project.
Make existing records useful
Drawings, original procurement records, previous maintenance notes and equipment inventories may clarify what is being offered. Match each document to the correct serial number or physical unit when possible. A drawing can show connections, but it may not reflect later changes, so share the revision date and known discrepancies instead of treating it as proof of present condition.
Existing records can reduce follow-up questions without creating a requirement to commission new tests. If documents are missing, say so. If they contain sensitive site information, discuss an appropriate way to share the relevant portions while preserving the facility's security procedures.
How the purchase process works
Start with the unit's location, quantity and any nameplate or inventory details you can share safely. We buy used, surplus and decommissioned transformers across all voltage classes, subject to review and agreed terms. We are a purchaser seeking equipment, not a seller of transformers. A request for review does not guarantee an offer or acceptance of a particular unit.
For equipment accepted under mutually agreed terms, we offer cash, payment upfront and covered freight. Ask for the payment timing, transport scope and any preparation responsibilities in writing before agreeing. Site-specific electrical work, specialized rigging and other arrangements should be spelled out; coverage is subject to the agreed transaction terms.
We do not require sellers to test equipment. Share any existing documents honestly, including known fluid or environmental information. Our review may depend on available documentation, and appropriate legal and safety requirements still apply.
Keep electrical safety separate from the sale
Do not open energized equipment, remove covers, touch connections or attempt electrical work to prepare a listing. Qualified electrical personnel must isolate and disconnect equipment and verify a safe condition using the site's applicable procedures. Treat a unit as potentially energized until the responsible qualified personnel have established otherwise.
Tell the buyer what is known about the equipment and access without attempting unsafe inspection. For possible fluid or PCB concerns, use existing labels and records and involve the appropriate environmental professionals. Do not drain or sample a unit simply to obtain a quote.
Frequently asked questions
Is 23 kV enough information for an offer?
It is a useful starting point, but it describes only one part of the specification. Share the other winding voltage, phase, kVA, site location and available records. Review and acceptance depend on the actual equipment and terms.
Do I have to test the transformer before asking for an offer?
No. We do not require sellers to test equipment. Provide existing nameplate information, photographs and records when safely available, and identify unknowns. Review, acceptance and any required documentation depend on the equipment and agreed terms; this does not remove safety or environmental obligations.
Is freight covered and when is payment made?
For a purchase accepted on agreed terms, the business offers payment upfront and covers freight. Confirm the payment and pickup arrangements in the written agreement, including whether specialized rigging, loading or site preparation is separately assigned. An inquiry alone does not guarantee a purchase.
What equipment can I submit for review?
We review used, surplus and decommissioned transformers across all voltage classes, including 23 kV rated transformers. Send the quantity, known ratings, location, ownership status and any available records. The final decision and transaction scope depend on review; not every unit can be accepted.
