Identify the 7.2 kV nameplate rating
The 7.2 kV figure may describe one side of a transformer, not its entire voltage configuration. Record the high-side and low-side ratings, the number of phases and the capacity exactly as shown on the nameplate or in an existing equipment record. If the meaning of a value is uncertain, share the source and say so.
A nameplate may list this value as one winding rating alongside a different secondary voltage or multiple taps. Send the complete notation so a single number is not mistaken for the whole transformer specification. A rating is not proof of present operating condition, ownership or electrical compatibility with another system.
Prepare a complete purchase request
Include the site location, whether the unit is connected or stored, and known manufacturer, model and serial number. Multiple tap settings, winding configurations or listed ratings should be included when available rather than condensed into a single voltage.
We consider transformers across all voltage classes, but an offer is not automatic. Do not open an enclosure or measure electrical values for the request. Qualified personnel isolate and disconnect the equipment using the applicable procedures before any authorized removal.
Explain insulating-fluid information
If a unit contains insulating liquid, share any existing fluid identification, labels, maintenance history and environmental records. If the type or PCB status is unknown, say that plainly. Some older electrical equipment may contain PCBs; an appearance, age or manufacturer name by itself does not establish the contents of a particular transformer.
The seller is not asked to perform testing to request an offer. Existing documentation may nevertheless be needed for review and for responsible handling, and an unknown or unsuitable status can affect whether a transaction is possible. Do not drain, sample or disturb the unit merely to prepare an inquiry.
Plan for equipment inside a building
If the transformer is indoors, the exit path may be as important to a quote as the nameplate. Identify its floor and room, any doorway dimensions that can be obtained safely, and any limitations on the use of lifts or building routes. Note whether the unit is surrounded by equipment that must remain operational.
Building management, the owner and a qualified removal team may need to coordinate access before pickup. The purchase discussion does not authorize a seller to dismantle walls, remove covers or disconnect equipment. Agree on any separate site work and its cost before committing to a collection plan.
One unit or a mixed equipment lot
A mixed lot can contain units with different ratings, manufacturers and histories. Number each transformer and provide a separate nameplate image or existing record for each one. Explain which units are being offered together and whether a buyer may review individual units separately.
List loose parts, cabinets and associated switchgear separately rather than assuming that an offer for a transformer includes everything nearby. A clear inventory makes it easier to compare an offer with the actual scope of pickup and avoids a dispute about a unit that was intended to stay.
Coordinate a shutdown without promising a date
When a transformer still serves a facility, a sale discussion and a safe shutdown are separate decisions. Explain whether the unit is already out of service, whether it is a spare, or whether its release depends on another project. Identify the person who can confirm when the asset is actually available.
Do not present a tentative construction milestone as a confirmed pickup appointment. Electrical isolation, ownership approval, site access and transport planning must be coordinated before the parties settle on collection arrangements. Any schedule depends on the particular review and agreed terms.
Give a precise pickup description
A city or county name starts the conversation but does not identify a pickup point. Provide the actual site location privately, plus an authorized contact and a description of where the transformer sits within the property. If the mailing address and physical entrance differ, tell the carrier which entrance is intended.
A location that lies near a municipal or county boundary can be described by street address and site entrance rather than relying on a city name alone. Do not publish sensitive access details unnecessarily; the goal is to make a later freight plan workable, not expose facility security information.
How the purchase process works
Start with the unit's location, quantity and any nameplate or inventory details you can share safely. We buy used, surplus and decommissioned transformers across all voltage classes, subject to review and agreed terms. We are a purchaser seeking equipment, not a seller of transformers. A request for review does not guarantee an offer or acceptance of a particular unit.
For equipment accepted under mutually agreed terms, we offer cash, payment upfront and covered freight. Ask for the payment timing, transport scope and any preparation responsibilities in writing before agreeing. Site-specific electrical work, specialized rigging and other arrangements should be spelled out; coverage is subject to the agreed transaction terms.
We do not require sellers to test equipment. Share any existing documents honestly, including known fluid or environmental information. Our review may depend on available documentation, and appropriate legal and safety requirements still apply.
Keep electrical safety separate from the sale
Do not open energized equipment, remove covers, touch connections or attempt electrical work to prepare a listing. Qualified electrical personnel must isolate and disconnect equipment and verify a safe condition using the site's applicable procedures. Treat a unit as potentially energized until the responsible qualified personnel have established otherwise.
Tell the buyer what is known about the equipment and access without attempting unsafe inspection. For possible fluid or PCB concerns, use existing labels and records and involve the appropriate environmental professionals. Do not drain or sample a unit simply to obtain a quote.
Frequently asked questions
Is 7.2 kV enough information for an offer?
It is a useful starting point, but it describes only one part of the specification. Share the other winding voltage, phase, kVA, site location and available records. Review and acceptance depend on the actual equipment and terms.
Do I have to test the transformer before asking for an offer?
No. We do not require sellers to test equipment. Provide existing nameplate information, photographs and records when safely available, and identify unknowns. Review, acceptance and any required documentation depend on the equipment and agreed terms; this does not remove safety or environmental obligations.
Is freight covered and when is payment made?
For a purchase accepted on agreed terms, the business offers payment upfront and covers freight. Confirm the payment and pickup arrangements in the written agreement, including whether specialized rigging, loading or site preparation is separately assigned. An inquiry alone does not guarantee a purchase.
What equipment can I submit for review?
We review used, surplus and decommissioned transformers across all voltage classes, including 7.2 kV rated transformers. Send the quantity, known ratings, location, ownership status and any available records. The final decision and transaction scope depend on review; not every unit can be accepted.
